Heating
Heating systems
The heating systems are used to maintain temperature and/or heat up a medium to certain temperature. The heating systems are also used to heat reservoirs or tanks.
Heating elements for industrial furnaces
As a authorized KANTHAL workshop for design and production of metalic spare heating elements for industrial furnaces, we are highly experienced in calculations, design and production of industrial heating systems. We offer consultancy in technical issues, high quality, fast deliveries, low pricces.
Solid fuel furnaces
Solid fuel furnaces: furnaces for wood from 15 to 100 kW; furnaces for coal and wood from 18 to 50 kW; furnaces for coal 25-35 kW, furnaces for pellets from 4.5 to 45 kW; and combined furnaces for wood, pellets, natural gas, and extra LFO, power 15 to 35 kW. 80 % of our solid fuel furnace production is exported.
Floor convectors
Floor convectors are suitable especially under the French windows and full-area glazing. Floor convectors can be found in banks, car showrooms and residential construction.
Wall convectors
Wall convectors are fast-response heaters which form a higher output range of MINIB convectors with 12V fans; they are also suitable for use when the window sill is located 50 to 60 cm above the floor so that the convector does not interfere in the window visor.
Electric convectors
Electric convectors can be used separately in dry interiors with any thermal demands on the intensity of heating. Electric convectors are single-speed, heating output is given by the heating spirals of the power of 750W for a convector with the length of 500 mm. The A - single-speed regulation can only be used.
Floor convectors
Floor convectors are supplied in versions with or without a fan. We are able to produce curved or angle-connected convectors. We use energy-efficient 12V DC direct-current motors of fans with extremely low energy consumption. Average consumption per a convector with a length of 1 m is 2-3W.
Floor heating
MINIB heaters are sold throughout Europe. Since 2007, we have been the holders of a quality management certificate ISO 9001:2001. The outputs of convectors are measured in an approved (accredited) test chamber according to EN 442-2. All heaters, except from the TE heater, have safe electric voltage of 12 V.
Heating convectors
Heating convectors - convector principle: cool air sucked in from the room flows through the exchanger and heated air is naturally or fan-aided blown into the room - convection. The heat released from the entire length of the convector creates a thermal curtain, separating the interior from the cold window surface.
Heating of industrial halls
For heating of industrial halls, the following is supplied: hot air aggregates, dark and light infra heaters, land-type boilers, ceiling destratificators, and ceiling hot water panel.
Fireplaces without chimney
Fireplaces without chimney: wall mounted, stationary, made from glass and custom made. Interior fireplaces without chimney Blaze Harmony offer you elegant design, easy installation, clean and ecological operation. Installation is suitable for homes, apartments, winter gardens, bathrooms, offices, restaurants. No need for chimney!
Electrical Infra heating
Electrical Infra heating will save up to 30% compared to conventional heating systems. Electrical Infra heating is a modern method of heating, it is appropriate for people with allergies - no air whirling, it is beneficial for the body, drains buildings, it is maintenance-free, cheap for investment, it is efficient.
Infra-red heaters
Infra-red heaters differ from the classical heating because they do not heat the air in the room directly, but heat radiation heats walls, floors, objects and people, from which the air is subsequently heated. At infra-red heaters there is no dust swirling dust and loss of humidity. Temperature is regulated by a thermostat.
Heat pumps
The heat pumps work on a principle of withdrawing heat from the environment ( water, air, earth or exhaust heat ). By repumping, the temperature increases and the heat is transferred to the heating system. We manufacture the heat pumps under the Swiss license. All our types of heat pumps feature the high standard performance factor.
Wall mounted air conditioning units
Design of the ceiling wall mounted air conditioning unit provides inconspicuous placement in the corner between the wall and ceiling. The Japanese Fuji Electric wall mounted air conditioning units are efficient, quiet, economical and of a modern design, and they help to create better environment.
Heating units
We offer flexible units, heating cable units, belt heating units, flat and fringe heating units, units K-RING and infrared heating units RAYMAX.
Wall air conditioning
Any air conditioning/air equipment advertised have one or more units within an object, classified as wall, under ceiling, ceiling ( cassette ), intra ceiling ( air conditioning/sill-type ); and one or more outside units, placed on walls, terraces and/or roofs of the objects.
Heating
Effective heating can be achieved by effective regulation and measurement of the temperature of individual rooms. Trasco company develops, manufactures and sells systems Trasco aimed at rating regulation. These systems of temperature programme control of individual rooms with recoverability of 2 - 5 years are suitable for everybody who wants to save heat.
Boilers for pellets
Boilers for pellets are designed as a set which includes the boiler, burner, feeder and hopper. Heating is fully automatic and ecological. Woody pellet boiler is a universal boiler which can be used for three burner outputs 16 kW, 24 kW, 30 kW. It is made of a metal sheet thickness of 6 mm and excels in construction and design.
Automatic boilers
Automatic boiler 5 to 45kW. Operation of boilers is automatic - controlled by room thermostat, possibly by equithermal regulation. They allow cascade connection to the output of 185kW, connection to the heating system and domestic hot water heating. Possibility of combination with solar systems. High adaptability to the specific conditions of the user.